MSS SP 43 Straight Tees
1. Drawing of Straight Tees
The typical drawing of MSS SP 43 straight tees.
2. Dimensions
| NPS | O.D | C | M |
|---|---|---|---|
| 1/2" | 0.84“ | 1.00" | 1.00" |
| 3/4" | 1.05” | 1.12" | 1.12" |
| 1" | 1.32“ | 1.50" | 1.50" |
| 1-1/4" | 1.66” | 1.88" | 1.88" |
| 1-1/2" | 1.90“ | 2.25" | 2.25" |
| 2" | 2.38” | 2.50" | 2.50" |
| 2-1/2" | 2.88“ | 3.00" | 3.00" |
| 3" | 3.50” | 3.38" | 3.38" |
| 3-1/2" | 4.00“ | 3.75" | 3.75" |
| 4" | 4.50“ | 4.12" | 4.12" |
| 5" | 5.56" | 4.88" | 4.88" |
| 6" | 6.62" | 5.62" | 5.62" |
| 8" | 8.62" | 7.00" | 7.00" |
| 10" | 10.75" | 8.50" | 8.50" |
| 12" | 12.75" | 10.00" | 10.00" |
| 14" | 14.00" | 11.00" | 11.00" |
| 16" | 16.00" | 12.00" | 12.00" |
| 18“ | 18.00" | 13.50" | 13.50" |
| 20” | 20.00" | 15.00" | 15.00" |
| 24“ | 24.00" | 17.00 | 17.00 |
3. Tolerances
The illustrative drawing showing angularity tolerances of straight tees.
| NPS | CM-Tol | OA |
|---|---|---|
| 1/2"~1-1/2" | ±0.06” | 0.03“ |
| 2"~3-1/2" | ±0.06” | 0.03“ |
| 4" | ±0.06” | 0.03“ |
| 5"~8" | ±0.06” | 0.06” |
| 10"~18" | ±0.09” | 0.09“ |
| 20"~24" | ±0.09” | 0.12” |
See more technical specifications of MSS SP 43.
CATEGORY AND TAGS: